It is usually more difficult to maintain a warm temperature when the low temperatures of the climate are approaching. Some systems installed in homes have auxiliary heating. This way, the system maintains the right temperature without waiting for the heat pump to turn on.
However, this is a function that consumes too much energy. Also, it is a matter of keeping the temperature warm for a few minutes at a high cost. That is why there are a lot of people who would prefer to turn this function off for good.
If you are one of them then in this guide you will learn how to turn off auxiliary heat on Honeywell thermostat. This way you can save some money on your next electricity bills.
Honeywell Thermostats We Recommends
What Does Auxiliary Heat Mean?
In short, auxiliary heat is a secondary function of a heating system. So when a thermostat detects a drop in the normal room temperature it should turn the heat pump on. Although turning on a heat pump takes a few minutes. That is why auxiliary heat uses additional energy to balance the temperature more quickly.
Therefore, to understand how the auxiliary heat works, you must read the instructions correctly. Therefore, each HVAC system has its operation for this type of situation. Usually, the thermostat needs to increase the temperature by about 3 degrees.
So when this happens in the morning the system does not have enough time for the heat pump to do its job. In these cases, the auxiliary pump is activated to re-balance the previously programmed temperature. It is at this point that an excessive amount of energy is used.
How to Turn Off Aux Heat on a Heat Pump?
Since this is an automatic operation a lot of users feel that they cannot do anything about this situation. However, you don’t have to feel helpless when you see how you spend extra energy.
First of all, you can use your thermostat’s programming. This allows you to set the ideal temperature between 60 and 68 degrees Fahrenheit. This way your thermostat will not need to turn on the auxiliary heat to balance the temperature.
While this may be somewhat uncomfortable due to the lower temperature, it is possible to solve this problem in other ways, such as using a blanket.
Another method that provides excellent results is to increase the temperature of your home in other ways. You can take advantage of the sun’s energy by allowing it to enter through your windows. Besides, it is advisable to install insulation to prevent heat from escaping.
On the other hand, you can close the grilles and doors of those rooms you do not need to go into. In this way, you will allow the warm air to be directed only to the parts of your home where you are.
Finally, if the outside temperature is too low, you will have to implement other methods to solve this problem. If it is a remote place with good access to firewood then a fireplace is the solution. This will save you money if the wood is not too expensive for you.
You may also like: How to Test Water Heater Element
When to Use Emergency Heat?
Also, you can make some lifestyle changes that will help this situation. One of the most important aspects is to wear warmer clothes during the day. You can also choose to add more layers when you go to sleep. This way you can lower your thermostat setting without suffering the consequences.
Besides, you can prevent the system from spending too much energy on maintaining a warm temperature in the winter. Also, the auxiliary heating will be switched off for a longer period.
Although there is no direct way to turn off the auxiliary heating, you can opt for these indirect solutions. This way you don’t have to spend money on too much energy.
Moreover, you can only use emergency heat when the outside temperature is really low. This means extremely cold temperatures. So, it is not a very frequent situation and you can take advantage of this auxiliary system at these times.
FAQs:
Generally, it is not possible to directly turn off this function of a heating system. To prevent the auxiliary heat from turning on and using up too much energy you can follow the advice in this review. In this way, you will prevent the auxiliary heat from being switched on.
The easiest way is to use the cancel button to return your thermostat to the normal setting.
It could be that the outside temperature is too low at certain times. If this is the case, your heat pump may be running but with an insufficient range.
In this case, your heat pump will turn on the auxiliary heat as a backup method. In this way, your heating system will be proportional to the right temperature.
Auxiliary heat is generally understood to be when the temperature is below 40 degrees Fahrenheit. However, this level may vary depending on the brand and type of heating system.
While you cannot directly turn off the auxiliary heat, you should not over-utilize it either. After reading this review you will know how to turn off auxiliary heat on Honeywell thermostat. In particular, some indirect solutions are very easy to implement by anyone.
All you need to do is to have some firewood, warm clothes and extra blankets on your bed. To go a little further, you can use insulation layers in your home and make the most of the heat generated. Finally, the sun is a good way to raise the temperature for free.