Hunter fans are energy-efficient cooling and heating tools. They are either operated with or without a remote control.
However, gaining access to hunter fans for troubleshooting or operation purposes can be challenging without the remote control.
Your hunter fan can be subject to several adjustments in the future – reversing action, switching, repair, etc. A properly accessed hunter fan promises energy efficiency and comfort.
Needless to say, it is highly imperative to pair hunter fans with a remote control.
And so, we present herein easy and effective tips on hunter fan remote pairing today!
How to Do Hunter Fan Remote Pairing Today
Here are tips on how to pair remote series (with a series “5” hunter fan:):
- 99199/99127/k047101000,
- 99122/99123/k0474010000,
- 99371/k6017,
- K5323
- 99116/k140302000,
- 99110/K113101000
- and k532401000
- Switch the fan off. Leave it off for 5-10 seconds. Finally, turn it back on using the wall power control.
- After turning it back on, press both the “fan” button and the “speed 3” button on hold for 4-5 seconds or until the low-speed light (if installed) starts to blink. Do this not later than 4 minutes
- Take note of the surge of power that follows. It should start low-speed, sustain for a few seconds, and then peak to its desired power speed. If the speed fluctuates, then the pairing is not successful, and you will have to repeat the whole process; but this time, wait for 1 minute before turning the fan back on. With a power light installed, successful pairing entails quick starting blinks to full lighting.
Here are tips on hunter fan remote pairing with series: k5579010000, k626601000/k626602000, 99198/k6266-03, and 99372/k6019 with a series ‘5’ hunter fan:
- Switch the fan off. Leave it off for 5-10 seconds. Finally, turn it back on using the wall power control.
- Upon turning it back on, press the “pair” button found on the back of the remote control to a “click” sound. Do this process not later than 3 minutes after turning the fan back on.
Note: Press the “pair” button only briefly before release. If you do not hear the “click” sound after pressing the “pair” button or when the hunter ceiling fan remote is not working still, then do it again.
- The signal that the pairing is successful is a low-speed to sustained fan power performance.
Here are tips on hunter fan remote pairing with series: 99370/k6018 and 99112/k113301000 with a series “5” hunter fan:
- Power off the fan for 10 seconds. After 10 seconds, turn out back on via wall power control.
- In sync with turning the fan back on, press and hold both the “fan” and “light” buttons (in the remote) for 4-8 seconds. Do this not later than 3 minutes after restarting the fan.
- You will know that this is successful when the power starts low-speed and sustains to a high-power state. This is easily indicated with an installed light because the light blinks and then stays, clearly visualizing the speed performance.
Here are tips on hunter fan remote pairing with series “5” hunter fan:
- Shut the fan off via the wall switch. However, if this proves in vain, go for the circuit breaker.
- Take out batteries from the remote control if the hunter ceiling fan remote doesn’t work.
- Replace both dual in-line packages of the remote transmitter and remote receiver. Set both switch actions to parallel directions for matching.
Note: Not all remote receivers have a dual in-line package. So you may have to buy a spare “DIP” for it.
- Restart the fan and reinstall the batteries to the remote control.
- Click briefly to release all three buttons together: low (1), medium (2), and high (3). Do this not later than 30 seconds after restarting the fan.
- Test the hunter fan remote pairing control performance by aiming at the fan’s light and speed.
How to Reverse a Hunter Fan Remote Pairing
It is a given fact that hunter ceiling fans and hunter fan remote are the best alternatives to costly heating and cooling tools. According to energy-conservation experts, it would be best to use the hunter fan – through proper hunter fan remote pairing action – the whole year as it effectively controls air movement in your home, making it an energy-efficient device.
The right-ward rotation of the hunter fan heats up effectively; while, the left-ward or counter-clockwise rotation of the hunter fan cools down effectively.
However, you cannot simply rotate the fan’s rotation without a remote control.
Here are our quick tips to reverse hunter fan with and without the remote control:
- Know the current direction of the rotation. Set it to a clockwise movement.
- Spot the “reverse” button in your remote control. Press one time to change the rotation direction. Do it the second time to return it to its previous rotation.
- If the fan does not have a remote control, spot the “reversing” switch located in the bulging middle of the fan, its base. But even before you do it, turn the hunter fan off to avoid further injuries.
- Once spotted, push the switch to the opposite side to achieve desired action.
- Turn the fan on. Enjoy.
- It is advisable to set the fan rotation rightward during the cold season, and left-ward when hot.
How to Troubleshoot Hunter Fan Remote Pairing if not Working
Dealing with a malfunctioning hunter fan remote pairing can be frustrating when first, you do not know what to do and second, you are kicking for a cooling relief.
The summer heat gets the best of your patience. And when you are impatient, chances are that you won’t be able to successfully mend the hunter fan whenever it isn’t working.
Here are quick tips on how to troubleshoot hunter fan when it is not working:
- Check the remote control first
How recently have you replaced its battery? You could have been barking on the wrong tree all along. So, make this the priority. If the remote control and the battery are in working condition, proceed to step 2.
- Go check the power source
Look into the switch. Then, go deeper into the circuit or power box. Look for any factors that impede the flow of current from the switch to the fan. To be blunt sure about the functionality of the power source, have it tested with a PCE or voltage tester tool.
- Go over switch controls, power settings, pull cords, etc.
- If the problem fails to surface within these areas, shift your focus to the fan.
- Remove the cover of the fan’s base
Look into the remote control receiving boxes; this set of boxes usually gets the low end of the stick, being constantly vulnerable to heating and eventual melting.
- If you notice melted or disfigured remote control receiving boxes, replace them prunto. In that case, the remote must be replaced too.
- Ceiling activity platform
If you don’t spot the problem here. Proceed further up into the ceiling activity platform. Once you open further up, check out if the power traffic from the remote control receiving boxes to the fan base is okay.
- Focus on the wired if remote control isn’t available
For the fans without the remote control (so that it is directly channeled to a wall switch), focus on the red, black, and white wires and test them. The red wire controls the light, black controls the fan and the white wire balances both. Make sure that, before coming to a decision, that all wires are functional. At this point, gather all the potential hunter fan remote pairing actions you have done and assess which hunter fans troubleshooting did or did not work.
- If you still do not find problems in these areas, then it is time to replace the entire fan.
You may also like: Best Outdoor Ceiling Fans
FAQs
The possible causes of limited hunter fan performance include: broken fan motors, broken plugs, grounded wiring, loose wiring, or impeded power surge.
An average hunter fan with good condition lasts at a maximum of 10 years; a high-quality hunter fan lasts for more than 12 years.
The main cause of a hunter fan not working is impeded electric flow. This is factored by melted remote control receiving boxes, loose wiring, and broken switch.
Yes they have, but only a rare number of them.
Conclusion
Pairing the hunter fan with a remote control eases its operation and solves a number of problems. Ultimately, the remote control pairing offers convenience on the part of the user. But even before using the hunter fan with the remote control, both have to be paired.
Troubleshooting the hunter fan also proves easier with the aid of a remote control owing to the fact ceiling fans are hung right up the ceiling, deeming difficulty in access. The easy and effective tips on hunter fan remote pairing does exactly to counter that problem.